15-07-2006, 19.17
|
#1 (permalink)
|
Posseduto dalla Console
Marco_Borghi non è collegato
Data registrazione: 20-11-2005
Residenza: Milan
Messaggi: 1,625
|
GaryOPA è tornato - Xtreme v1.2 firmware - Hitachi 7in1 - v32/36/40/46/47/58/59
GaryOPA - Xtreme v1.2 firmware - Hitachi 7in1 - v32/36/40/46/47/58/59
NEW UPDATED PACKAGE: "XTRM-HITACHI-7IN1-V1_2.RAR" - 07/15/2006
WHAT IS CHANGED FROM: "XTRM-HITACHI-6IN1-V1_2.RAR" - 07/10/2006
* NEW v58 Hitachi firmware added, now complete with SEVEN Hitachi drives!!
- Thanks to "dvdgorila" for providing the original dump
* GREATLY IMPROVED FLASHing - Almost perfect flashing system!
* GREATLY IMPROVED RESTORing - Can restore drive with NO BACKUP!
Next release will include Security Sector Extraction for all Hitachi's
GaryOPA
Flashing your drive
------------------
FLASH.BAT automatically makes a complete backup of your firmware system
* To FLASH a drive, it must be in Mode B and a "Windows Drive Letter"!
* Then just run FLASH.BAT from "Command Prompt" while running windows.
* The new FLASH needs two things, the "Windows Drive Letter", and FOUR
numbers for the BACKUP directory, use a new unique number like 1572:
- This is used to make your BACKUP directory!
- For Example: FLASH.BAT H 1572
- Will cause the FLASH after running to have, a BACKUP directory
"X12-1572.OPA" and the program will store FIVE firmware files:
---- key.bin ---- DRIVE KEY /// DRIVE KEY
---- was.bin ---- Your drive before FLASH
---- gdrXX.bin ---- The untouch original fw
---- modXX.bin ---- The patched Xtreme12 fw
---- now.bin ---- Your drive after FLASH!
- Where the XX in the above names will be the version of your Hitachi
* Program will not start unless a BACKUP is correctly made and stored!
* Flash will auto-detect your firmware build of your Hitachi drive.
* You can flash over any version of firmware including "f900" or "v1.1"
* System will check flashed firmware, and redo until 100% completed.
* Once you get the PASS / DONE line, you can shut-down the system.
Restoring your drive
-------------------
RESTORE.BAT automatically restores your drive back to original state
* To RESTORE a drive, it must be in Mode B and a "Windows Drive Letter"!
* Then just run RESTORE.BAT from "Command Prompt" while running windows.
* The new RESTORE does not need any backup, it will 100% restore your
drive back to "ORIGINAL" state as long as it is visible in Windows!
* Program will not start unless it detects the version of your Hitachi!
* You can restore any drive, even "v1.1" or "f900" or your own hacks.
* System will check flashed firmware, and redo until 100% completed.
* Once you get the PASS / DONE line, you can shut-down the system.
__________________
 .... sono in costruzione
|
|
|